Conducted RF
IEC 61000-4-
6
Radiated RF
IEC 61000-4-
3 Vrms
150 kHz to 80
MHz
6Vrms in ISM
bands
between 0,15
MHz and 80
MHz
3 V/m
80 MHz to 2,7
GHz
(V1)=3Vrms
(E1)= 6Vrms
in ISM bands
(E1)=3V/m
Portable and mobile communications
equipment should be separated from the
equipment by no less than the distances
calculated/listed below:
D=(3.5/V1)(Sqrt P)
150kHz to 80MHz
D=(3.5/E1)(Sqrt P)
80 to 800 MHz
D=(7/E1)(Sqrt P)
800 MHz to 2.5 GHz
where P is the max power in watts and D
is the recommended separation distance
in meters.
Field strengths from fixed transmitters,
as determined by an electromagnetic
site survey, should be less than the
compliance levels (V1 and E1).
Interference may occur in the vicinity of
equipment containing a transmitter.
Where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter
manufacturer and D is the
recommended separation distance in
Page 44 / 51
To Next Page
Loading...