General Cautions and
Warnings
The following cautions and warnings, system
specifications, and user instruction sheets should be
read carefully before attempting to use this Eilon
Engineering product.
Products are supplied with the express understanding that the purchaser and/or user
are thoroughly familiar with their correct application and proper use. Eilon
Engineering will assume no responsibility for the misuse or misapplication of any of
its products.
In addition to these guidelines, the user must also comply with general safe operating
practices when using the system e.g. when weighing during lifting.
The load limit rating, a.k.a. capacity, indicates the maximum force or load a system can
carry under normal working conditions. Overloading or placing a load on the system
above its rated capacity is dangerous and is therefore STRICTLY PROHIBITED
except during the system's annual safety testing. This testing must be performed by
qualified personnel and allows the system to be overloaded up to 25% of its rated
capacity, no more than once per year.
Eilon Engineering will accept no liability for damage caused by the product being
used in excess of the working load limit or from abuse.
Opening, attempting to open, or any attempt to repair the system by unauthorized
personnel (without written authorization) will nullify the warranty as well as the
manufacturer's liability and could be dangerous. Refrain from doing so and contact an
Elion representative should any problem with the system arise.
When measuring loads using a shifted zero with the tare function, the actual load is
the value indicated on the readout plus that of the shifted zero or tare.
For best results, it is recommended to turn your system on 10 minutes prior to
measuring.
The system is designed for static loading. Eilon Engineering or other qualified
To Next Page
Loading...
