4. Configuration
Using the various available features and options for the Ron 2501
Settings can be accessed through the Menu.
To access the Menu press and hold
Once you see the first function displayed you may use the up arrow ▲ or down arrow
▼ keys to scroll through all of the available option on the system.
To enter into the calibration procedure, you will be required to enter an additional
code (see CALIBRATION section 3.0).
At any time you may press ◀ ESC to exit a menu.
4.1 Backlight
The Ron 2501 is equipped with a backlight for use in low light environments.
The backlight is activated using the button.
Use of the backlightgreatly reduces the battery life.
To change the backlight settings, access the menu and use the ▲▼ keys scroll to
BACKL. Press OK.
There are two setting than can be configured:
● TIME - Configure how long the backlight will remain on after the
backlight button is pressed. If set to ALWAYS the backlight button will
toggle the backlight on and off.
● BRIGHT - Set the brightness of the backlight. The higher the brightness
the shorter the battery life will be when using the backlight.
To Next Page
Loading...
