To Next PageTo Next PageHow to troubleshoot EINHELL Water Pump motor that fails to start?
If your EINHELL Water Pump's motor fails to start up, begin by checking the mains voltage to ensure it is present. If voltage is not the issue, the pump rotor might be blocked. In this case, dismantle and clean the pump to remove any obstructions.
Why does the thermostat switch off my EINHELL GE-GP 5537 E?
If the thermostat switches your EINHELL Water Pump off, it could be due to a motor overload. Try dismantling and cleaning the pump. High friction from foreign substances can also cause this issue, so prevent the intake of foreign substances by using a filter.
What to do if my EINHELL GE-GP 5537 E has inadequate delivery rate?
If your EINHELL Water Pump has an inadequate delivery rate, start by checking the suction height, as it might be too high. Also, the coarse filter could be dirty and require cleaning. If the water level is falling rapidly, try placing the suction hose at a deeper level. Contaminants might diminish pump performance, so clean the pump and replace any worn parts.
What to do if my EINHELL GE-GP 5537 E has no intake?
If your EINHELL Water Pump has no intake, several factors could be at play. First, the non-return valve might be dirty and needs cleaning. Ensure the pump chamber has a water connection by filling water into the intake. Check the intake line to confirm it is airtight. Also, verify that the maximum suction height has not been exceeded.
General| Brand | EINHELL |
|---|---|
| Model | GE-GP 5537 E |
| Category | Water Pump |
| Language | English |
