EINHELL TC-MS 216 User Manual

GB
- 19 -
Danger! - Read the operating instructions to reduce the risk of injury
Caution! Wear ear-mu s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Caution! Risk of injury! Do not reach into the running saw blade.
Warning! To make miter cuts (with the saw head inclined or the turntable set at an angle), the adjustab-
le stop rail must be xed at an outer position.
To make 90° crosscuts, the adjustable stop rail must be xed at the inner position.

EINHELL TC-MS 216 Specifications

General

Input power	- W
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Idle speed (max)	5000 RPM
Cutting width (90°)	120 mm
Blade diameter	216 mm
Saw blade included	-

Weight and Dimensions

Depth	535 mm
Width	364 mm
Height	330 mm
Weight	8270 g
Package width	9800 mm