EINHELL TC-TS 2225 U User Manual

GB
- 65 -
41. Keep unused electric tools out of the reach of children. Do not
allow people who are not familiar with the tool or who have not
read these instructions to use the tool. Electric tools are dange-
rous if they are used by inexperienced people.
42. Keep your cutting tools sharp and clean. Carefully maintained
cutting tools with sharp cutting edges will jam less and are easier
to control.
43. Have your tool repaired only by trained personnel using only
genuine spare parts. This will ensure that your tool remains safe
to use.
44. All covers and safety devices have to be properly fi tted before
the equipment is switched on.
45. When working with wood that has been processed before,
watch out for foreign bodies such as nails or screws etc.
46. Before you actuate the On/Off switch, make sure that the saw
blade is correctly fi tted and that the equipment‘s moving parts
run smoothly.
47. Keep handles dry, clean and free from oil and grease.
Keep this safety information in a safe place!
Anl_TC_TS_2225_U_SPK7_Rewe.indb 65 24.03.2020 10:29:25

EINHELL TC-TS 2225 U Specifications

General

Product color	Red, Silver
Quick stop function	Yes
Idle speed	4250 RPM
Cutting height @ 45°	55 mm
Cutting height @ 90°	80 mm
Cross stop tilt angle range	-45 - 45 °
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Saw blade type	Single
Number of teeth	48
Number of saw blades	1
Package depth	615 mm
Package width	715 mm
Package weight	28600 g

Weight and Dimensions

Depth	750 mm
Width	610 mm
Height	380 mm
Weight	17460 g
Table depth	555 mm
Table width	580 mm
Bore diameter	30 mm
Blade diameter	254 mm
Height adjustment range	0 - 80 mm