Sapphire Infusion Pump User Manual71
The acceptable range of a given parameter is displayed in the upper right corner of the
Main Display. When you enter a value that is outside of a permitted range, the range
values stay red, and the OK function key is disabled. The values of a range are
dynamic, and change according to other parameters that have already been
programmed.
When entering time, the pump allows you to enter minutes up to the value of 59.
Infusion time of over 59 minutes must be expressed in hours and minutes. For example,
90 minutes must be entered as 1:30 (h:min).
Alphanumeric keypad
In some instances, for example, defining a new PreSet program, or entering a drug
name, the keypad displays letters and symbols in addition to numbers.
The Alphanumeric keypad displays uppercase letters with numbers, and lowercase
letters with symbols. Uppercase letters and numbers are the default state. Switch the
default keypad from uppercase and numbers to lowercase and symbols by pressing the
'abc sym' key on the toolbar and back to default by pressing 'ABC 123' key.
To Next Page
