Eizo ColorEdge CG276 - To Set Clipping

22
Chapter2AdjustingScreens
●
To set clipping
This function allows you to display the monitor with the colors based on the standard values of the dened
color gamut (such as sRGB). The method of displaying the dened color gamut outside the normal gamut of the
monitor can be set.
Procedure
1. Choose “Color” from the Adjustment menu, and press
.
2. Choose “Advanced Settings” from “Color”, and press
.
3. Choose “Clipping”, and press
.
4. Select “On” or “Off” with
or .
On Off
Displayscolorsbasedonthestandardvalues. The
colors outside the gamut of the monitor are clipped.
Displayscolorswithpriorityonthecolorgradation
ratherthanthecoloraccuracy.Theprimarycolors
outsidethegamutofthemonitor(blueinthediagram)
areadjustedtothecolorsmostsimilartothosethat
canbedisplayedbythemonitor.
Colorgamutofmonitor
Colorgamutdefinedbystandard
Colorgamutdisplayedonscreen
Attention
• Thisisaconceptualdiagram,anddoesnotdisplaytheactualcolorgamutofthemonitor.
5. Press to exit.
Attention
• This function can be set only in the color mode specied by the color gamut standard.