To Next PageTo Next PageHow to troubleshoot if I cannot communicate with the camera from my Eizo DuraVision FDF 2711W-IP Monitor?
If you cannot communicate with the camera, check the settings of both the network camera and the system.
What to do if the mouse or keyboard doesn't work with my Eizo DuraVision FDF 2711W-IP Monitor?
Check that the USB cable is properly connected to your Eizo monitor. If it is, try pulling out the USB cable and connecting it again.
What to do if my Eizo DuraVision FDF 2711W-IP Monitor restarts all of a sudden?
If your monitor restarts unexpectedly, it might be due to a high internal temperature. Check the temperature around the product to ensure it's adequately ventilated.
Why are the display images not smooth on my Eizo Monitor / camera images are not displayed (when camera images are being displayed)?
If the display images aren't smooth, try reducing the resolution and/or bit rate set for the network camera. Also, verify that the hubs and network cables you're using are appropriate for the amount of information being transmitted. Alternatively, move to the setting screen and return to the live image screen.
How to fix communication error message when “Apply” is selected for network camera manual registration on Eizo DuraVision FDF 2711W-IP Monitor?
A communication error during network camera manual registration suggests a problem with network camera communication. Check the network connection status and camera registration details.
What to do if the mouse / keyboard responses lag on Eizo DuraVision FDF 2711W-IP Monitor?
If your mouse or keyboard responses are delayed, try reducing the resolution and/or bit rate set for the network camera.
What to do if the screen is not displayed and the power indicator is not turned on on my Eizo DuraVision FDF 2711W-IP?
Connect the power cord.
How to troubleshoot if the web browser screen cannot be displayed on my Eizo DuraVision FDF 2711W-IP Monitor?
If the web browser screen is not displaying, check for IP address conflicts among devices on the same network.
What to do if the set date and time are not displayed correctly on my Eizo DuraVision FDF 2711W-IP Monitor?
If the date and time are not displayed correctly, especially after the system hasn't been connected to power for a week or more, set the date and time again.
How to fix the time mismatch between the network camera and the Eizo DuraVision FDF 2711W-IP system?
To resolve the time difference between the network camera and the system, go to the setting screen and adjust the time of the network camera to match the time of the product.
General| Resolution | 1920 x 1080 |
|---|---|
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle (H/V) | 178°/178° |
| IP Decoding | Yes |
| PoE | Yes |
| Color Depth | 16.7 million colors |
| Aspect Ratio | 16:9 |
| Screen Size | 27 inches |
| Connectivity | HDMI, DisplayPort, DVI-D, VGA |
| Audio Inputs | 3.5 mm stereo mini-jack |
| Audio Outputs | 3.5 mm stereo mini-jack |
| USB Hub | Yes |
| Built-in Speakers | Yes |
| VESA Mount | Yes (100 x 100 mm) |
