To Next PageTo Next PageHow to adjust brightness on Eizo Monitor?
If your Eizo monitor screen appears too bright or too dark, you can adjust it using the “Brightness” or “Contrast” settings in the Setting menu. Also, consider turning on the Auto EcoView function, which automatically adjusts the screen brightness based on the environmental brightness.
Why my Eizo FORIS FS2332 Monitor has no picture?
If your Eizo monitor displays no picture and the power indicator does not light, check whether the power cord is properly connected and ensure the main power switch is turned on. If the problem persists, try turning off the main power, and then turning it on again after a few minutes.
Why Eizo FORIS FS2332 auto adjustment function doesn't work?
The auto adjustment function of your Eizo monitor does not work during digital signal input. This function is intended for use on the Macintosh and on AT-compatible PC running Windows. It does not work properly when an image is displayed only on a part of the screen (command prompt window, for example) or when a black background (wallpaper, etc.) is in use. This function also does not work correctly with some graphics boards.
How to fix incorrect color on Eizo FORIS FS2332 Monitor HDMI input?
If the color shown on your Eizo monitor is not correct when using HDMI input, try changing the color space of the video signal in “Screen” - “Color Space” under the Setting menu.
How to fix blurred characters on Eizo FORIS FS2332?
If your Eizo monitor displays characters that appear blurred, ensure that the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. You can also adjust the “Smoothing” setting in the Setting menu.
How to fix no audio output on Eizo FORIS FS2332 Monitor?
If you are experiencing no audio output from your Eizo monitor, check whether the stereo mini jack cable is properly connected and ensure the volume is not set to 0. Also, verify the settings of the current external device and audio playback software. If using HDMI input, check the external device and the “Source” setting in the Setting menu.
How to prevent afterimages on Eizo FORIS FS2332 Monitor?
If your Eizo monitor displays afterimages, avoid displaying the same image for a long time. Use the screen saver or power save function to prevent displaying static images for extended periods.
Why is my Eizo FORIS FS2332 screen whitish?
If your Eizo monitor screen is whitish or blackish, use “Color Space” of the “Screen” submenu (for the HDMI input), “Black Level”, and “Contrast” in the Setting menu to adjust it.
How to remove noise from Eizo Monitor screen?
If noise appears on the screen of your Eizo monitor, set “Overdrive” to “Off” in the Setting menu. When entering the signals of HDCP system, the normal images may not be displayed immediately.
How to correct display position on Eizo FORIS FS2332 Monitor?
If the display position on your Eizo monitor is incorrect, use the “Position” setting in the Setting menu to correct the image position. If the problem persists, use the graphics board’s utility to change the display position.
General| Screen Size | 23 inch |
|---|---|
| Resolution | 1920 x 1080 |
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angles | 178° horizontal / 178° vertical |
| Connectivity | HDMI, DVI-D, DisplayPort |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
