English
24 4. ADJUSTMENT
Color Mode Menu
Custo
m
sRGB
Function Descriptions Adjustable range
To set the gamma value
1.8 ∼ 2.6
Gamma
(p.34)
√
-
NOTE
• If setting the gamma value, the using the monitor in
the digital signal input is recommended.
If using the monitor in the analog input signal, set the
gamma value from 1.8 to 2.2.
To change the saturation
-128 ∼ 127
Setting the minimum
level (-128) turns the
image to the
monochrome.
Saturation
√
-
NOTE
• The <Saturation> adjustment may cause
undisplayable color tone.
To change the flesh color,
etc.
-32 ∼ 32
Hue
√
-
NOTE
• The <Hue> adjustment may cause undisplayable color
tone.
To change each color (red,
green and blue)
0 ∼ 100%
By adjusting the red,
green and blue color
tones for each mode,
custom colors can be
defined. Display a
white or gray
background image and
adjust the <Gain>.
Gain (p.34)
√
-
NOTE
• The values shown in the percentage are available only
as a reference tool.
• Setting the <Temperature> (p.34) invalidates the
<Gain> adjustment. <Gain> setting returns to the
default.
Reset
√
-
To return the color settings
to the default settings
Select the “Reset”.
To Next Page