English
10 1. INTRODUCTION
1-3. Controls & Connectors
Front
ENTERAUTO
SIGNAL
1 - 2
(3)
(4)
(5)
(2)
(6)
(7)
(1)
(8)
MODE
(1)ScreenManager
®
Monitor Adjustment menu (p.16)
(2)SIGNAL1-2
Input Signal
Selection Button
Switch the input signals when connecting 2
PCs. (p.15)
(3)MODE
Mode Button Show or switch the color mode. (p.23)
(4)AUTO
Auto Adjustment
Button
Adjust the screen to appropriate condition
automatically. (analog input only)
(5)ENTER
Enter Button Show the ScreenManager on the screen.
Confirm the setting / adjustment function.
Save the adjustment values.
(6)
Control Buttons
(Left, Down, Up,
Right)
Select the desired function.
Increase and decrease the adjustment value.
(7)
Power Switch ON or OFF the monitor’s power.
(8)
Power Indicator Indicate monitor’s operation status.
Blue: The screen is displayed
Flashing blue: Last 15 min. of operation
time before entering the power off state.
(p.18)
Flashing orange slowly: Power off
Control Panel
To Next Page
Loading...
Need help?
General