eka EKF 616 TC - Page 41

Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC
EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC
_________________________________________________________________________________________ page 41
BLACKOUT
(during the cooking
cycle)
- Mains power supply outage
- The oven is
deactivated
- Use the “SELECT”
key to reactivate oven
operation
HIGH LCD
TEMPERATURE
- The display temperature is
higher than the permissible
value: LCD breakage hazard
- The oven continues
the cooking cycle.
- Use the “SELECT”
key to remove the alarm.
Contact a qualified
technician to eliminate
the cause of the alarm.
CHECK POSITION OF
FAT-COLL.VALVE
- Activated the function “fat
collection valve“ without the
exhaust valve supplied.
- The oven is
deactivated
To reactivate the oven
operate as follows:
- Push the button
- Push the button and
select the icon “4” .
- Push the button
“SELECT” to confirm
- Push the button to
deactivate the function
“fat coolection valve“
- Push the button
“SELECT” to confirm
Important
The alarm may only occur when the needle shaped core probe is used (optional)