ELAN E4 – Owner's manual
21
6.2.1. ENGINE OPERATION
The following instructions for engine operation are provided for information purposes only
and do not include all the details of engine operation and maintenance. For detailed
information see the operation instructions, supplied by the engine manufacturer, which are
included in the Owner’s Manual. Before operating the engine, you should familiarize yourself
with those instructions.
Before starting the engine:
• Switch on the main engine switch.
• Check and open the engine coolant water intake valve.
• Check and open the fuel supply valve on the fuel tank.
Starting and stopping the engine:
On/Off button (1)
Depress the button to start or stop the system. The panel cannot be switched off when
engine is running.
Start button (4)
When the button is depressed the pre-heat function is activated and the start motor
engaged.
Multi-function button (2)
• Confirm the alarm. If an alarm occurs, a flashing warning symbol will be displayed in
the tachometer window and an audible alarm will sound. The alarm is confirmed by
depressing the multi-function button. The audible alarm is silenced and the warning
symbol is lit continuously until the fault is remedied.
• Backlighting. To switch tachometer window backlighting on or off, depress the
button for 1-5 seconds. The backlighting can be adjusted in five steps by depressing
the button for less than 1 second.
• Adjust the tachometer window contrast by holding down the button for more than 5
seconds.
Stop button (3)
The engine stops running when the button is depressed.
To Next Page
Loading...
Need help?
General
