ELAN E4 – Owner's manual
29
Figure 13
1. Retention bilge strainer
2. Retention bilge strainer with float
switch
3. Electrical bilge water drain pump
4. Non-returning valve
5. Manual bilge water pump
6. Manual bilge pump outlet
7. Electrical bilge pump outlet
8. Wetlocker strainer
9. Wetlocker outlet
10. Shower bilge strainer
11. Manual shower drain pump
12. Shower bilge water outlet
To check the bilge pump operation press the bilge switch on the electrical panel on “manual”
position. For checking in automatic operation turn switch on “automatic” and lift the bilge
float by hand. You will hear the pump performance in the case of the present of water in the
bilge check the outflow.
CAUTION: Check the bilge pump for bilge water before leaving the dock, during
sailing and when leaving the boat for a longer period.
Switch on the bilge water pump switches on the control panel and check
the operation of the bilge pump.
Follow the instructions for use and precautions marked on the pump.