EasyManua.ls Logo

Elastec MediBurn30 - Safety Instructions

Default Icon
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MEDIBURN30 14 D-115 Rev 010
www.elastec.com
SAFETY INSTRUCTIONS
Before using medical waste incinerator, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal injury.
1. Read and understand the instructions in this manual.
2. Follow all warnings and instructions marked on the product.
3. The unit must be disconnected from the power source when there is a
chance water may come into contact with the electrical connections.
4. The unit must be on stable ground and in no danger of falling or tipping.
5. The unit must stand free and clear of surrounding buildings, vegetation or
other combustible material.
6. Ensure that there are no flammable items above the exhaust stack.
7. Never touch the surfaces of the unit while in operation or during the
cool-down period.
8. Do not use the unit in the vicinity of flammable gases.
9. Never put aerosol or other pressurized cans into the unit.
10. If unsure about the safety of disposing of certain items in the unit, consult
your local distributor for details and instructions.
11. Refer servicing to qualified personnel under the following conditions:
Power supply cord is frayed or damaged.
Liquid has been in contact with the electrical system.
The product has been damaged and exhibits a distinct change in
performance.
Fuel is leaking inside the burners.