ELASTEL EG500 - Programming

ELASTEL TECHNOLOGY CO., LTD.
WWW.ELASTEL.COM
LED #
LED
Description
LED 1
POWER
Power indicator
LED 2~4
SIG
Cellular Signal strength indicator
LED 5
ONLINE
Network online status indicator
LED 6
SYS
System status indicator
LED 7
WiFi
WiFi status indicator
LED 8
ALM
Alarm indicator
5.2 Programming
Use the Elastel prebuilt command led_ctl to control the LEDs. Examples as below:
$ led_ctl
led_ctl -m < system | wifi | alarm | online | sig > -s <on | off |none | low | mid |
high>
$ sudo led_ctl
led_ctl -m < system | wifi | alarm | online | sig > -s <on | off | none | low | mid |
high>
$ sudo led_ctl -m system -s on
Status
Description
on
Turn on led, does not support in SIG
off
Turn off led, does not support SIG
none
no signal, only for SIG
low
low signal, only for SIG
mid
Medium signal, only for SIG
high
high signal, only for SIG