ELASTEL EG500 - System Status

ELASTEL TECHNOLOGY CO., LTD.
WWW.ELASTEL.COM
8.2 Driver installation
1. Download the source code from Elastel GitHub
git clone https://github.com/Elastel/sx1302.git
2. Installation
$ cd sx1302
$ chmod +x install.sh
$ ./install.sh
Notice:
 During the install.sh execution, SCP will be used, keyGen will be generated, and a dialog
will be displayed. Press Enter
 When you run install.sh, you may be asked to enter the password. The default user name
and password are admin and admin.
3. Check the process status
$ systemctl status loragw.service
● loragw.service - lorawan gw
Loaded: loaded (/lib/systemd/system/loragw.service; enabled; vendor preset:
enabled)
Active: active (running) since Tue 2022-08-02 12:32:18 BST; 5min ago
Main PID: 27741 (gwstart.sh)
Tasks: 5 (limit: 1830)
CPU: 23.425s
CGroup: /system.slice/loragw.service
├ ─27741 /bin/sh /home/admin/sx1302/bin/gwstart.sh
└─27753 ./lora_pkt_fwd
Aug 02 12:36:51 Elastel gwstart.sh[27753]: ##### 2022-08-02 11:36:51 GMT #####
Aug 02 12:36:51 Elastel gwstart.sh[27753]: ### [UPSTREAM] ###
Aug 02 12:36:51 Elastel gwstart.sh[27753]: # RF packets received by concentrator: 0
Aug 02 12:36:51 Elastel gwstart.sh[27753]: # CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: