EasyManua.ls Logo

ELASTEL EG500 - Wifi

ELASTEL EG500
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ELASTEL TECHNOLOGY CO., LTD.
WWW.ELASTEL.COM
$GPVTG,,T,,M,,N,,K,N*2C
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,,N*53
3) Common useful AT commands
AT Command
Description
AT+ICCID
The ICCID (Integrated Circuit Card Identifier) number of
the SIM card
AT+CIMI
Query IMSI number of SIM which is attached to ME
AT+CGSN
The International Mobile Equipment Identity (IMEI).
AT+COPS?
The current operators and their status and allows to set
automatic or manual network selection.
AT+CSQ
indicates the received signal strength <rssi> and the
channel bit error rate <ber>
7. WiFi
Check the device:
$ ifconfig
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether e4:5f:01:8b:be:d1 txqueuelen 1000 (Ethernet)
RX packets 6760 bytes 877872 (857.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 376 bytes 31652 (30.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Other manuals for ELASTEL EG500