ELASTEL TECHNOLOGY CO., LTD.
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 133 bytes 33576 (32.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
6.2 Dialing Programming
Connect to the network using the Elastel prebuilt command quectel-CM
Execute $quectel-CM –h for more details.
$ sudo quectel-CM
[08-02_09:39:09:900] Quectel_QConnectManager_Linux_V1.6.0.24
[08-02_09:39:09:904] Find /sys/bus/usb/devices/1-1.2 idVendor=0x2c7c idProduct=0x125,
bus=0x001, dev=0x004
[08-02_09:39:09:905] Auto find qmichannel = /dev/cdc-wdm0
[08-02_09:39:09:905] Auto find usbnet_adapter = wwan0
[08-02_09:39:09:906] netcard driver = qmi_wwan, driver version = 5.15.32-v8+
[08-02_09:39:09:906] Modem works in QMI mode
[08-02_09:39:09:939] cdc_wdm_fd = 7
[08-02_09:39:10:038] Get clientWDS = 20
[08-02_09:39:10:070] Get clientDMS = 2
[08-02_09:39:10:104] Get clientNAS = 4
[08-02_09:39:10:135] Get clientUIM = 1
[08-02_09:39:10:167] Get clientWDA = 1
[08-02_09:39:10:199] requestBaseBandVersion EC20CEFAGR06A14M4G
[08-02_09:39:10:327] requestGetSIMStatus SIMStatus: SIM_READY
[08-02_09:39:10:360] requestGetProfile[1] ///0
[08-02_09:39:10:391] requestRegistrationState2 MCC: 460, MNC: 11, PS: Attached, DataCap:
LTE
[08-02_09:39:10:423] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
[08-02_09:39:10:424] ifconfig wwan0 0.0.0.0
[08-02_09:39:10:432] ifconfig wwan0 down
[08-02_09:39:10:487] requestSetupDataCall WdsConnectionIPv4Handle: 0x87338dc0
To Next Page
Loading...
