2 Select “New Batch” or “Open Existing Batch” to add readings
4 Select “Edit Batch” to rename, clear readings from or delete a
batch
Once all readings have been taken the gauge automatically
opens a new batch with a link
1 To use the Batching memory facility, press the Batch softkey
3 Copy and review batch data
5 Fixed Batch Size allows users to pre-define the number of
readings to be stored in a batch.
to the original batch name. For Example NewBatch_1 becomes
NewBatch_2, NewBatch_3, etc.
4 Save each reading into memory or store the average of a pre-defined number of
readings using the Counted Average function.
www.elcometer.com
en-9
R
7 BATCHING - MODEL T
8 DISPLAYING GRAPHS
3 Press the Display softkey and select
“Readings & Run Chart”.
The Bar Graph displays an analogue
representation of the thickness value
together with the highest, lowest and
average reading as measurements are
taken. To display the Bar Graph:
4 If a reading is outside set limits, the white bar and the reading value turn red.
To display the Run Chart of the last 20
readings:
1 Press the Batch softkey
2 Select “New Batch” or “Open Existing
Batch”
8.1 BAR GRAPH (MODEL B & T)
4 Red points signify a reading outside the batch’s limits (if set).
8.2 RUN CHART (MODEL T)
1 Press the Display softkey and select
“Readings & Bar Graph”
To Next Page
Loading...
Need help?
General
