Elcometer 224 User Guide

8.3 BATCH GRAPH (MODEL T)
4 Press the Zoom softkey followed by ç or è to
review individual readings as required.
To display the Batch Graph:
2 Select “Batch Graph”.
1 Select the appropriate batch name
from Batch/Review Batch
4 Red columns signify a reading outside the
batch’s limits (if set).
8 DISPLAYING GRAPHS (continued)
www.elcometer.com
en-10
R
9 MENU STRUCTURE - MODEL B
Coefficient of Variation
Select Statistics
Mean
Number of Readings
Highest Reading
Lowest Reading
Standard Deviation
Gauge Auto Off
Setup
Measurement Mode
Units
Language
Beep Volume
Screen Settings
Screen Timeout
Auto Display Rotation
Opening Screen
Screen Brightness
Screen Settings
Gauge Information
Contact
About
Probe Information
Legal
¡
¡
¡
¡
¡
¡
Emergency Light
Setup
Menu
About
Delete Last Reading
Reset
Pressing the Cal Softkey
starts the calibration process
Calibration
50.5 µm
Data
52.3 µm
51.0 µm
51.8 µm
51.5 µm
Escape Delete Ok
Last Five Readings
µm
mm
Units
mils
inch
Legal Notices
Regulatory
Legal
Patents
Readings & Bar Graph
Display
Readings Only
Clear Statistics
Readings & Selected Stats
Statistics
Statistics
Clear Statistics
View Selected
Counted Average
View All
Select Statistics
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
Custom
Standards
Measurement Mode
Immediate
¡
¡
¡

Elcometer 224 Specifications

General

Brand	Elcometer
Model	224
Category	Measuring Instruments
Language	English