R
14
Enter the ‘batch number’ and then press [ENTER]; the display will alternate
between ‘dEL’ and ‘batch no’ as shown (batch number 14 in this example).
Press [ENTER] to delete the batch or [Esc] to cancel the operation.
CLEARING ALL BATCHES
This function is only available in immediate mode. It will clear all batch data, but leave the batch numbers
intact.
Press [BATCH] and [CLEAR]:
Press [ENTER]; the display will alternate between ‘Clr’ and ‘ALL?’
Press [ENTER] to clear all batches or [Esc] to cancel the operation.
DELETING ALL BATCHES
This function is only available in immediate mode. It will clear all batch data and all of the batch numbers.
Press [BATCH] and [DEL]:
To Next Page
Loading...
Need help?
General
