Elcometer 355 User Manual

R
13
Press [ENTER] and the display will alternate between ‘dEL’ and ‘batch no’ as
shown (batch number 14 in this example).
Press [ENTER] to delete the batch or [Esc] to cancel the operation.
CLEARING DEFINED BATCH DATA
Press [BATCH] and [CLEAR]:
Enter the ‘batch number’ and then press [ENTER]; the display will alternate
between ‘Clr’ and ‘batch no’ as shown (batch number 14 in this example).
Press [ENTER] to clear the selected batch or [Esc] to cancel the operation.
If the defined batch has never contained any readings to clear, the display will
show:
DELETING DEFINED BATCH
Press [BATCH] and [DEL]:

Elcometer 355 Specifications

General

Brand	Elcometer
Model	355
Category	Measuring Instruments
Language	English