R
22
Press any operations key to return to the ‘bAtt’ display.
7.7 BACKLIGHT FUNCTION
Having pressed [SETUP], use [<] or [>] to select:
Backlight Enable/Disable.
Press [ENTER] and use [<] and [>] to toggle between:
on - Ensures the backlight is on at all times when required, but timed to maximise battery life.
oFF - The backlight will be off at all times except for power up display test.
Press [ENTER] to set this option or [Esc] to cancel the operation.
7.8 LANGUAGE FUNCTION
Having pressed [SETUP], use [<] or [>] to select:
Language formats used on printouts.
Press [ENTER] to see which language version is active.
The following languages are available:
English German
French Portuguese
To Next Page
Loading...
Need help?
General
