Elcontrol Microvip 3 plus - Page 62

57
CWP0,CWP1,CWP2,CWP3,CWP4 = three-phase positive kWh (BCD)
where CWP4 is the exponent (hexadecimal)
CVARP0,CVARP1,CVARP2,CVARP3,CVARP4 = three-phase positive kvarh (BCD)
where CVARP4 is the exponent (hexadecimal)
CWN0,CWN1,CWN2,CWN3,CWN4 = three-phase negative kWh (BCD)
where CWN4 is the exponent (hexadecimal)
CVARN0,CVARN1,CVARN2,CVARN3,CVARN4 = three-phase negative kvarh (BCD)
where CVARN4 is the exponent (hexadecimal)
Example:
:01 03 D1 D2 D3 D4 D5 D6 D7 D8 D9 V1..V200 D10 D11 D12 D13 D14 D15 D16 D17 I1..I200
E0 (third frame starting )
0005FF (Frequency 50.0 Hz)
41010000FE (kWh 1.41)
61020000FE (kvarh 2.61)
32080080FE (-kWh 8.32)
79040080FE (-kvarh 4.79)