Why is there water dripping from the outdoor unit base of my Electra Wmz 9 in heating mode?
If water is dripping from the outdoor unit base of your Electra Air Conditioner during heating mode, the water drain outlet is likely clogged. Open the outdoor unit cover, clean out the water outlet, and thoroughly clean the base inside.
What to do if my Electra Air Conditioner operation indicator (green led) does not light up when starting from unit?
If the operation indicator (green led) on your Electra Air Conditioner does not light up when starting from the unit, check the main P.C.B and display P.C.B. Replace P.C.B if necessary.
What to do if my Electra Wmz 9 refrigeration system does not function correctly?
Check for leaks or restrictions using an ammeter, pressure gauge, or surface thermometer. Repair the refrigeration system and charge refrigerant if necessary.
What to do if the stand-by indicator (red led) on the central control display panel of my Electra Air Conditioner doesn’t light up?
If the stand-by indicator (red led) on the central control display panel of your Electra Air Conditioner doesn’t light up, it could be due to incorrect voltage between the line and neutral terminals on the main P.C.B. If the voltage is low, repair the power supply. If there is no voltage, repair the general wiring. If the voltage is correct, replace the main or display P.C.B’s.
General| Brand | Electra |
|---|---|
| Model | Wmz 9 |
| Category | Air Conditioner |
| Language | English |
To Next Page