ELECTRO FREEZE Shake Model CS700-FG
185231-17
25
11 Spindle Mixer (Optional)
11.1 Preparation
Before use, the spindle shaft, agitator
and surrounding surfaces should be
washed, rinsed, and sanitized. Follow the
procedures for Cleaning & Sanitizing -
Spindle Mixer.
11.2 Cleaning and Sanitizing - Spindle Mixer
CAUTION
High Speed Rotating
Mixing Shaft
To avoid injury from rotating
mixer shaft disconnect
power before cleaning.
To maintain cleanliness, the spindle shaft
and agitator must be washed, rinsed, and
sanitized on a regular basis and at the
end of each day’s operation. The operator
should wash hands with an antibacterial
soap and avoid coughing and/or sneezing
on parts.
11.2.1 Daily Cleaning
Important:
Do not allow water or product above
the collar at the top portion of the
agitator shaft. Water above this collar
can damage the motor and bearings.
Using a solution of warm soapy water and
a disposable towel, wash the back wall
and all soiled surfaces. Repeat with rinse
water.
To Next Page