Need help?Do you have a question about the Electro-Harmonix 2880 and is the answer not in the manual?
General| Type | Looper |
|---|---|
| Number of Tracks | 4 |
| Sample Rate | 44.1 kHz |
| Bit Depth | 16-bit |
| MIDI | In/Out |
| Power Supply | 9V DC adapter |
| Dimensions | 2.5 inches |
Warning against operating the instrument in damp environments or near liquids.
Guidance on proper placement for balance and unobstructed ventilation.
Instructions for safe exterior cleaning using a damp sponge and mild detergent.
Advice to keep the unit away from heat sources for optimal performance.
Warning to use only the supplied AC adapter and disconnect when unused.
Lists situations requiring immediate attention and professional service.
Guides users through the initial process of recording their first loop on the 2880.
Explains the process of layering additional audio onto an existing track.
Details recording two tracks at once for stereo sound.
Describes recording loops with precise timing and beat synchronization.
Explains how to combine multiple tracks into a single stereo output.
Explains the function of the NEW LOOP button for entering Record-Ready Mode.
Describes the RECORD button's role in initiating and controlling recording states.
Explains the PLAY button's function in starting, stopping, and controlling playback modes.
Explains the availability and function of the 4 recording tracks.
Covers the Mixdown track, its modes, and how to perform a mixdown.
Compares Non-Quantize and Quantize modes for loop recording length and timing.
Details program change messages used for controlling 2880 functions and track mutes.
To Next Page
