Electro-Voice EKX-12 - Using as Floor Monitors

Floor monitor
EKX-12 and EKX-15 loudspeakers may be used as a floor monitor by placing the loudspeaker
on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
en 13
Electro-Voice User Manual 2015.01 | 01 | F.01U.308.100