Electro-Voice EKX-12 - Stage Monitor System Setup

Using full-range systems as stage monitors
Multiple EKX-12’s or EKX-15’s in monitor position (EKX-15 versions shown).
NL4 Pin Configuration
Pin 1+ and 1- Used
Pin 2+ and 2- Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Speakers Nominal Minimum
1 8 Ohms 7.2 Ohms
2 4 Ohms 3.6 Ohms
3 2.7 Ohms 2.4 Ohms
4 2 Ohms 1.8 Ohms
6.2
en 19
Electro-Voice User Manual 2015.01 | 01 | F.01U.308.100