Electro-Voice EKX-12 - Eyebolt Usage Best Practices

!
Warning!
Eyebolts must be fully seated and oriented in the plane of pull. Always use fender washers at
least 1.5 inch in diameter and 1/16 inch thick under the eyebolt to distribute the load on the
enclosure.
Figure 5.2: Eyebolt shown with and without washer
Figure 5.3: Eyebolts shown oriented in the plane of pull
EKX Passive Loudspeakers
2015.01 | 01 | F.01U.308.100 User Manual Electro-Voice