Removing the subwoofer caster wheels
The ETX-15SP and ETX-18SP subwoofers have caster wheels attached for easy transportation
in portable applications. The caster wheels are removable for a permanent installation.
To remove the subwoofer caster wheels, do the following:
1. Remove the 16 M6 screws, 16 washers, and four (4) casters on the rear of the
subwoofer.
2. Install the 16 M6 screws and 16 washers back into the rear of the subwoofer.
Ensure all 16 M6 screws are tight.
Notice!
If the caster wheels are removed reinstall the screws.
If the screws are not reinstalled air leaks occur in the enclosure, resulting in undesirable
performance.
4.7
ETX Powered Loudspeakers
2016.04 | 05 | F.01U.276.083 User Manual Electro-Voice
To Next Page
Loading...
