Caution!
Do not attempt to move this loudspeaker system when it is fully assembled.
You may damage the system or cause personal injury.
Assembling the loudspeaker system
To assemble the loudspeaker system, do the following:
1. Place the subwoofer on a level and stable surface.
2. Insert the symmetrical pole into the top of the subwoofer.
The pole has magnets (A) at each end. The pole can be inserted on either end.
3. Place the column array loudspeaker on top of the subwoofer pole.
4. The column array loudspeaker system set up is complete.
4
en 11
Electro-Voice Installation manual 2017.07 | 02 | F.01U.341.640
To Next Page
Loading...
