Electrolux 30" - Page 5

5
Calibration 42
To check oven calibration 42
The calibration of the ES100 system cannot be adjusted 42
Troubleshooting 42
F1 code 42
F3 code 42
Control will not program 42
Blank Display 42
No heat 42
If the control appears to be operating normally
but the bake and broil elements do not heat 42
If the control appears to be operating
normally, the broil element heats but
the bake element does not heat 43
If the control appears to be operating
normally, the bake element heats, but
the broil element does not heat 43
Sample schematic for ES 100 control system 44
The ES 200 electronic oven control system 45 - 50
How to program the ES 200 45
Temperature conversion 45
To change the temperature from °F to °C or from °C to °F45
To set the clock 45
To set the minute timer 45
To change the minute timer while it is in use 46
To cancel the minute timer before the set time has run out 46
To set or change the temperature for baking 46
To set the controls for baking 46
To change the oven temperature after baking has started 46
To set control for continuous bake or 12 hour energy saving 46
To set control for continuous baking 46
To set control for oven lockout feature 46
To broil 46
To set the controls for a self-clean cycle 47
When the self-clean cycle is completed 47
Stopping or interrupting a self-cleaning cycle 47
How the ES 200 operates 47
Bake 47
Broil 48
Clean 48
Calibration 48
To check oven calibration 48
To change the calibration 48
Troubleshooting 48
F1 code 48
F3 code 48
F9 code 49
Control will not program 49
Blank Display 49
No heat 49
If the control appears to be operating normally
but the bake and broil elements do not heat 49
If the control appears to be operating
normally, the broil element heats but
the bake element does not heat 49