Electrolux 30" - Page 6

6
If the control appears to be operating
normally, the bake element heats, but
the broil element does not heat 49
Oven door does not lock when the oven is
programmed for clean 49
Oven door locks when the oven is programmed
for clean but the oven does not heat 49
Lock motor runs continuously 50
Door latch is partly closed with door open,
cannot close door 50
Sample schematic for ES 200 control system 51
The ES 300 electronic oven control system 52 - 60
How to program the ES 300 52
For a silent control panel 52
Temperature conversion 52
To change the temperature from °F to °C or from °C to °F52
To set the clock 52
To set the minute timer 52
To change the minute timer while it is in use 53
To cancel the minute timer before the set time has run out 53
To set or change the temperature for baking 53
To set the controls for baking 53
To change the oven temperature after baking has started 53
To set control for continuous bake or 12 hour energy saving 53
To set control for continuous baking 53
To set control for oven lockout feature 53
To set the timed bake feature 53
To program the oven to begin baking 53
immediately and to shut off automatically 53
To program oven for a delayed start time
and to shut-off automatically 54
To change the oven temperature or bake
time after baking has started 54
Speed Bake 54
General cooking instructions 54
To set Speed Bake™ cooking system 54
To broil 55
Self-cleaning oven 55
Adhere to the following cleaning precautions 55
To set the controls for a self-clean cycle 56
When the self-clean cycle is completed 56
Stopping or interrupting a self-cleaning cycle 56
How the ES 300 control system works 56
Bake 56
Time bake 57
Broil 57
Speed bake 57
Clean 57
Calibration 57
To check oven calibration 57
To change the calibration 57
Troubleshooting 57
F1 code 57
F3 code 58
F9 code 58
Control will not program 58
Time bake does not operate 58