- 23 -
DGS-TDS-N 05.09 A. B. © Electrolux 599 521 367 EN
Fig. HOC2000 power board built in the appliance (example built-in cooker)
The assembly position in the appliance is at the right side wall of the housing. For disassembly of
the power board you first have to remove the housing lid. Afterwards you can unscrew both screws
which fix the unit power board and plastic housing from the outside of the appliance.
Note: A built-in cooker must be removed completely from the built-in cavity for disassembling
the power board.
To Next Page
Loading...
