EasyManua.ls Logo

Electrolux EOB 96000 - Troubleshooting: Steam and Water Issues; Water Inside the Oven; Water Tank Indicator Lights; Steam Function Not Working

Electrolux EOB 96000
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38 electrolux
SOLUTION
You have poured too much water in the
tank. Disconnect all oven functions, then
mop up all the water that has spilled out
with a sponge or a cloth.
Fill the tank with water until the light
comes on.
If water starts to come out inside the oven,
and the “tank full” warning light is still off,
the problem can only be resolved by a
qualified service engineer.
Fill the tank. If after having poured 800cc of
water, the warning light remains on, the
problem can only be resolved by a qualified
service engineer.
Ensure that the steam function is selected
Close the oven door securely.
Fill the water tank.
Run tank cleaning process
(as described
in the paragraph concerned).
The steam inlet hole may be obstructed.
Remove the lime that obstructs the hole.
PROBLEM
THERE IS WATER INSIDE THE
OVEN
WARNING LIGHT “TANK FULL”
OFF
WARNING LIGHT “TANK EMPTY”
ON
THE STEAM DOES NOT WORK
IT TAKES MORE THAN THREE
MINUTES TO EMPTYING WATER
TANK.
WATER LEAKAGE FROM CAVITY
STEAM INLET
Run tank cleaning process
(as described
in the paragraph concerned).