Electrolux EWM 1000 Plus - 7.6 The NTC-sensor

- 24 -
DGS-TDS-N07.2003 C.D. 599 51 74-13 EN
7.6 The NTC-sensor
The temperature is controlled by the PCB by means of a NTC temperature sensor.
To check the NTC sensor function you can measure the ohmic resistance between the contacts
J5/1 and J5/2.
Temperature (°C) resistance (W)
20 6050
60 1250
80 640
7.5 The heating element
The heating element is powered by a relay on the PCB via
the contacts of the pressure switch when closed on FULL.
Connection: 230V; 50Hz;
Power: 1950W
Fuse: 10A