SOI/DT 2007-02 dmm 54/56 599 38 60-23
o. Before mounting the new board extract the knob pushing the
hooks indicated by the arrow as represented in figure.
While reassembling, repeat the same operations in reverse order
and pay attention to the correct positioning of the knob.
11.2 Door interlock
a. Remove the ring that secures the bellow gasket to the cabinet.
b. Remove the bellow gasket.
c. Remove the screw which secures the door interlock to the front
side.
d. Push inside the hook.
e. Push it upwards.
f. Extract the door interlock.
c
d
e
f
To Next Page
Loading...
