8. GUIDe FoR otHeR UseFUL PRoGRAMs (CONT’D)
8.6 Only Wash
1
Put the laundry into the Drum and put softerner into the detergent
case. Then close the Door.
• Softener should be below ‘MAX’ level.
2
Press the Power button.
• The LED shows only ‘- --’ signal.
3
Select the program you want using the program selection dial.
• If you press ‘RINSE+SPIN’ button without selecting program,
the ‘Cotton’ program is selected as default program.
4
Press the ‘RINSE+SPIN’ button.
• ‘1’ time rinse and ‘Medium’ rpm spin speed and ‘Cold’ water
temperature are selected automatically.
• ‘Low’ rpm spin speed is selected in ‘WOOL’ and ‘DELICATE’
program.
• If you want to change the Rinse time(s) and Spin condition,
press each corresponding button.
5
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door.
NOTE
• The water temperature selecting is possible during this process.
• You can add the washing course during this process by pressing ‘WASH’ button.
To Next Page
Loading...
