5
To change the minute timer while it is in use 39
To cancel the minute timer before the set time has run out 39
To set the controls for baking 39
To change the oven temperature after baking has started 39
To set control for continuous baking 39
To set control for oven lockout feature 39
To program the oven to begin baking immediately
and to shut off automatically 39
To program oven for a delayed start time
and to shut-off automatically 40
When the set bake time runs out 40
To change the oven temperature or bake
time after baking has started 40
Speed Bake™ 40
To set speed bake cooking system 41
To broil 41
To set the controls for a self-clean cycle 41
When the self-clean cycle is completed 42
Stopping or interrupting a self-cleaning cycle 42
How the ES 300 operates 42 - 45
Bake 42
Time bake 43
Speed bake 43
Broil 43
Clean 43
Calibration 43
To change the calibration 43
Troubleshooting 44 - 45
F1 code 44
F3 code 44
F9 code 44
Control will not program 44
Time bake does not operate 44
Blank display 44
Bake element does not heat 44
Broil element does not heat 45
Oven door does not lock when the oven is programmed for clean 45
Oven door locks but the oven does not heat 45
Lock motor runs continuously 45
Door latch is partly closed with door open 45
Fan in oven does not run when speed bake switch is turned on 45
Sample schematic for ES300 control system 46
The ES 400 Electronic Oven Control System 47 - 55
How to program the ES 400 47 - 52
Clock 47
To set the clock 47
Changing between 12 or 24 hour time of day display 47
Continuous bake or 12 hour energy saving 47
To set the control for continuous bake or 12 hour energy saving 47
Minute timer 48
To set the minute timer 48
To change the minute timer while it is in use 48
To cancel the minute timer before the set time has run out 48
Oven lockout feature 48
To activate the oven lockout 48
To reactivate oven operation 48
Temperature display - Fahrenheit or Celsius 48
To Next Page
Loading...
