12
Installation manual
3 Setup
3.1 Unpacking
Note!
For W5130N-W5330N two persons are recommended for the unpacking.
The machine is delivered bolted onto the transport pallet and packed in a crate or box.
Remove packing from the machine.
Remove the front and rear panel.
Remove the bolts between the machine and pallet. There is one to the right in the front of the machine and another
diagonally opposed to it, at the back of the machine.
fig.W00846
Remove the machine from the pallet.
Note!
When moving the machine, handle it with care.
Place the machine on its final position.
To Next Page
Loading...
