Installation manual
19
For WRAS-approved machines: Remove the three plastic covers (A).
fig.7811B
Water pressure:
Miniumum: 50 kPa (0.5 kp/cm
2
)
Maximum: 800 kPa (8 kp/cm
2
)
Recommended: 200–600 kPa (2–6 kp/cm
2
)
Note!
If the water pressure is below the minimum value, the wash result can not be guaranteed for certain program.
For WRAS-approved machines; always check connection requirements on WRAS website.
Plumbing
This machine is approved for all UK applications as suitable for category 5.
The product is listed in the WRAS regulations advisory scheme directory and is suitable for direct connection to
mains drinking water. No special plumbing arrangements e.g. break tanks are required.
Water Council approved double check valves should be fitted in between the stopcocks and the water inlet hoses.
To Next Page
Loading...
