61
8. Product Life and Warranty
1. Product Life
• The economic life of E-COAT Master is approximately 10 years.
• This product life is highly dependent on the periodic maintenances and spare part changes in a timely manner. Improper
maintenance will lead to lower product life.
• SİSTEM TEKNİK A.Ş. warrants supplying the needed service and the spare parts for the entire product life.
2. Warranty and Warranty Conditions
• The gun is warranted for production and parts failure for 1 ( one ) year
• Spare parts that are changed from the warranty are free-of-charge.
• The parts that are supplied in the system which are not produced by SİSTEM TEKNİK A.Ş. are warranted with their own
manufacturers and their own conditions.
• SİSTEM TEKNİK A.Ş. will not be held responsible for the improper usage of the machine or any unauthorized usage.
These are not in the warranty.
3. Operating Conditions
• Read the user manual before using the gun.
• Only legally allowed people can operate E-COAT Master.
• Only trained and authorized people can operate E-COAT Master .
• SİSTEM TEKNİK A.Ş.’s suggested spare parts should be used at all times.
• Proper maintenance has to be done and the spare parts has to be changed in a timely manner
• The operational safety has to be assured by the customer; the operators who are not capable of working under safety
rules shouldn’t be operating the Control Unit
• All the suggestions and warnings in this manual have to be carefully considered and applied.
To Next Page
Loading...