Electron E-COAT Master - Scope of Delivery

7
2. E-COAT Master Manuel Bare Kit 3. E-COAT Master H
EN European Standarts
1.4. Product Specic Safety
If there is an installation work that will be done by the customer, the local regulations have to be considered.
The plant must be checked for any type of foreign objects inside the booth or in ducting, input and exhaust air before start up.
All equipment must be grounded according to the local regulations before start up as well.
1.5. Scope of Delivery
1. E-COAT Master Automatic Bare Kit
94/9/EC
The approximation of the laws of the Member States
relating to apparatus and safety systems for their
intended use in potentially explosive atmospheres
EN 12100-1 EN 12100-2
Machine safety
EN IEC 60079-0
Electrical equipment for locations where there is
danger of explosion
EN 50 050
Electrical apparatus for potentially explosive atmos-
pheres - electrostatic hand-held spraying equipment
EN 50 177
Stationary electrostatic spraying equipment for
ammable coating powder
EN 12981
Coating plants - spray booths for application of
organic powder coating material - safety require-
ments
EN 60 529
IP-Type protection: contact, foreign bodies and
water protection for electrical equipment
EN 60 204
VDE regulations for the setting up of high voltage
electrical machine tools and processing machines
with mains voltages up to 1000 V
• E-GUN C3
• E-GUN C3 Automatic Gun Cable (12 m)
• E-FEED V2
• E-COAT Master
• Regulator and Air Distribution Unit
• Hose connection accessories
• E-GUN C1
• E-FEED V2
• E-COAT Master
• Regulator and Air Distribution Unit
• Hose connection accessories
• E-GUN C1
• E-FEED V2
• E-COAT Master
• E-HOPP 50
• E-COAT Mobile Carrier w/ Air
Distribution Unit and Fluidization
Control
• Hose connection accessories