Need help?Do you have a question about the Elegoo NEPTUNE 3 MAX and is the answer not in the manual?
General| Build Volume | 420 x 420 x 500 mm |
|---|---|
| Layer Resolution | 0.05-0.4mm |
| Nozzle Diameter | 0.4 mm |
| Print Speed | 30-180 mm/s |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD card |
| Display Screen | 4.3-inch touch screen |
| Max Nozzle Temperature | 260°C |
| Print Technology | FDM (Fused Deposition Modeling) |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Bed Leveling | Automatic Bed Leveling |
| Extruder Type | Direct Drive |
To Next Page