Need help?Do you have a question about the Elegoo NEPTUNE 4 PRO and is the answer not in the manual?
General| Build Volume | 225 x 225 x 265 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Max Print Speed | 500mm/s |
| Filament Diameter | 1.75 mm |
| Bed Leveling | Automatic |
| Technology | FDM |
| Max Nozzle Temperature | 300°C |
| Max Bed Temperature | 110°C |
| Display | 4.3-inch Touchscreen |
| Power Supply | 350W |
| Supported Filaments | PLA, TPU, PETG, ABS |
| Connectivity | USB |
Provides essential safety guidelines for operating the 3D printer, covering placement, touching hot components, cleaning, moving parts, and emergency procedures.
Details print principle, build size (225x225x265mm³), precision (±0.1mm), nozzle diameter (0.4mm), and print speed (30-500mm/s).
Guides on attaching the print head using M3x16 and M3x8 screws for secure installation.
Covers connecting stepper motors, limit switches, filament detector, and adjusting voltage for power-on.
Guides users through calibrating the nozzle-to-platform distance using A4 paper and auxiliary/automatic leveling functions.
Details the printer's ability to resume printing after power interruptions, noting potential issues with platform adhesion.
Addresses problems with stepper motor movement, noises, and limit switch functionality.
Covers issues like clogged nozzles, extruder gear slipping, and inadequate cooling.
Provides solutions for models not sticking to the platform or experiencing warping during printing.
To Next Page