Need help?Do you have a question about the Elegoo NEPTUNE 3 and is the answer not in the manual?
General| Build Volume | 220 x 220 x 280 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Bed Leveling | Automatic |
| Max. Nozzle Temperature | 260°C |
| Max. Bed Temperature | 100°C |
| Frame Material | Metal |
| Connectivity | USB |
| Power Supply | 24V |
To Next Page