Need help?Do you have a question about the Elegoo Neptune 4 Max and is the answer not in the manual?
General| Build Volume | 420x420x480mm |
|---|---|
| Nozzle Diameter | 0.4mm (default) |
| Filament Diameter | 1.75 mm |
| Maximum Nozzle Temperature | 300°C |
| Display | 4.3-inch Touchscreen |
| Firmware | Klipper |
| Supported Filaments | PLA, ABS, TPU, PETG |
| Connectivity | USB |
| Bed Leveling | Automatic |
| Motherboard | 32-bit |
Issues with unresponsive or silent stepper motors on the X/Y/Z axis and their solutions.
Problems with the nozzle head assembly's extrusion performance and troubleshooting steps.
Solutions for models not adhering to the build platform or exhibiting warping.
Addressing issues where printed layers are misaligned during the printing process.
Technical specifications related to the 3D printer itself, including build volume and precision.
Specifies the ambient and maximum operating temperatures for the printer.
Lists software details such as slicer, file formats, and interface options.
How to adjust the operational settings of the rear cooling fan during printing.
Explains how users can modify printing modes, speed, acceleration, and fan settings.
Steps to verify filament feeding through the extruder and nozzle.
How to perform a test print and evaluate the first layer adhesion.
Explains the printer's ability to resume printing after a power interruption.
Details the filament sensor's function and when to replace filament.
Step-by-step guide for installing the included ELEGOO Cura slicer software.
To Next Page